Get your GATORS Embroidered patch. (Patch sold separately)
 
SIZE: 2" x 2.5"
 
Add to any garment such as clothing, hats, jackets, or backpacks. These patches are perfect for displaying affiliations, fandoms, achievements, and more.
 
To ensure your patch looks professionally pressed every time, follow these four simple steps.
 
* Position Your Patch: Being that your patch will be pressed facing down, touching the bottom plate, you will first need to secure the patch to your garment with Thermal Tape (heat resistant tape) to ensure it stays in its desired location when being placed on your heat press.
 
* Load Garment Onto Heat Press Face Down: Now that your patch is taped in place, flip the garment over and place onto the heat press so the patch is facing downwards and touching the lower plate. This makes it easier to melt the low-melt glue on the back of the patch so that the patch will adhere to your garment. The goal is to melt the low-melt glue on the back of the patch, not the visible portion of the patch you’ll see when it’s adhered to the garment.
 
* Press: After laying the garment with the patch face down, lay a Protective Guard Sheet over it to protect your garment from the iron, then press for 20 seconds at 325°F with 70-80 PSI or hard pressure. After pressing, remove the garment from the press and allow it to cool for at least 30 seconds before removing the thermal tape. This allows the melted glue to solidify, thereby bonding it to your garment.